00:15:30 <mb0x88[m]> why would my monero gui wallet show a transaction with "unknown Amount"
00:54:36 <ofrnxmr[m]> <CidadodoMonerist> "Check this out" <- Non telegram link?
01:16:13 <Tremor[m]> Seems like just inform portuguese people about Monero
01:32:52 <mlcboss[m]> i tried to inform monero but most just don't understand 😢
01:57:55 <nsaunders> my wallet was nearly finished syncing, but now shows:  https://pastebin.com/deTQ1C7a          I'm using the GUI wallet installed from flatpak
02:02:31 <gingeropolous> nsaunders, it seems to just be restarting
02:02:53 <gingeropolous> did you run out of storage?
02:03:23 <nsaunders> hmm.  let me check space.
02:03:49 <nsaunders> oh my goodness, full hard drive
02:04:16 <nsaunders> I thought it would only store a small amount of info!?  Perhaps it can be pruned or something
02:08:11 <nsaunders> on Linux, where are the transactions for a wallet stored?  And, would there a command I can run to shrink the command.  This is a very simple wallet with seven transactions.
02:26:30 <gingeropolous> i assume its trying to run a full node?
02:27:03 <gingeropolous> there is a pruning option. unfortunately, you have to start the sync over with the pruned option enabled
02:27:50 <gingeropolous> nsaunders, this is the flag: --prune-blockchain
02:28:20 <gingeropolous> you'll have to go into advanced mode in the gui and put --prune-blockchain in the daemon startup flags field
02:32:28 <nsaunders> ah, okay I'll do that again with the prune option.  I thought I'd selected something like that from within the GUI.  Where is the data being stored? I asked here also:  
02:32:28 <nsaunders> nicholas@mordor:~/Monero/wallets/monero_gui$ 
02:32:28 <nsaunders> nicholas@mordor:~/Monero/wallets/monero_gui$ ls -alh
02:32:28 <nsaunders> total 27M
02:32:28 <nsaunders> drwx------ 2 nicholas nicholas    6 May 23 19:14 .
02:32:28 <nsaunders> drwx------ 5 nicholas nicholas    5 May 23 19:21 ..
02:32:28 <nsaunders> -rw------- 1 nicholas nicholas 9.9M May 23 19:14 monero_gui
02:32:29 <nsaunders> -rw------- 1 nicholas nicholas 1.7K May 23 18:59 monero_gui.keys
02:32:29 <nsaunders> -rw------- 1 nicholas nicholas 5.5M May 22 20:47 monero_gui.old_cache
02:32:30 <nsaunders> -rw------- 1 nicholas nicholas  12M May 22 20:48 monero_gui.old_cache.1
02:32:30 <nsaunders> nicholas@mordor:~/Monero/wallets/monero_gui$ 
02:32:32 <nsaunders> sorry
02:32:46 <nsaunders> https://monero.stackexchange.com/q/13956/14165       I asked on stack overflow
02:40:31 <gingeropolous> the blockchain will be in .bitmonero
02:40:39 <gingeropolous> ~/.bitmonero
02:45:36 <gingeropolous> ermagerd the gui with the closing wallet spinnies
02:47:11 <gingeropolous> yeah there's no prune checkbox in the gui
02:47:15 <gingeropolous> wait what version am i on
02:47:33 <gingeropolous> eh, 18.1.2... it'd be there if it was there
03:00:25 <nsaunders> it's less than one gig when I run           du -h .bitmonero/           is that about right?     
03:01:31 <nsaunders> On the GUI, I'm selecting simple mode withouth the bootstrap, so no download of the blockchain, but even in the "advanced options" see nothing about pruning the blockchain.
03:16:16 <nsaunders> might the cli, installed via apt, have stored blockchain data elsewhere?  version 17
03:52:27 <nsaunders> how would I determine whether I have enough space for a full node, pruned node, etc?
04:40:24 <DanIsnotthemanBr> https://www.reddit.com/r/Monero/comments/13povai/we_hacked_feather_wallet_to_get_trocador_rates/
04:46:57 <jeffro256[m]> <nsaunders> "might the cli, installed via apt..." <- The version on apt is outdated by many years. Version 17 will not work on current chain
05:25:19 <saunders> Yeah, and v18 of the cli won't build on Ubuntu.  Or so they say.  Of course, the GUI on flatpak installed fine.  I can't see why there's no cli on flatpak, but there you are.
05:34:44 <jeffro256[m]> <saunders> "Yeah, and v18 of the cli won't..." <- it builds fine on Ubuntu for me? Which Ubuntu & which version of monero are you trying to build ?
05:44:51 <saunders> Oh, I was going by an answer on ask Ubuntu 
08:05:29 <DanIsnotthemanBr> use flatpak 
08:06:08 <DanIsnotthemanBr> https://www.kicksecure.com/wiki/Monero
08:06:27 <DanIsnotthemanBr> flatpak run --command=monero-wallet-cli org.getmonero.Monero --wallet-file /home/user/path/to/wallet
08:59:27 <DanIsnotthemanBr> ^ he gave up. not very Rick Astley
13:47:00 <duck[m]> How can I check the monero price without ads and trackers
13:50:45 <side-trips[m]> !cr xmr
14:05:02 <pastel3[m]> <duck[m]> "How can I check the monero price..." <- duckduckgo: "XMR USD"
14:05:05 <pastel3[m]> (requires javascript)
14:07:44 <ofrnxmr[m]> Cake wallet
14:07:44 <ofrnxmr[m]> onion fiat api
14:08:21 <ofrnxmr[m]> The real q is.. what do u need it for
14:09:39 <ofrnxmr[m]> Maybe youre just watching tickers, maybe youre integrating rates into a program
14:50:25 <mlcboss[m]> buy giftcards with xmr that works with tor?
15:31:33 <meow[m]> <pastel3[m]> "duckduckgo: "XMR USD"" <- duckduckgo has microsoft trackers
15:36:06 <mlcboss[m]> meow[m]: wut??
15:40:35 <ocean[m]> <duck[m]> "How can I check the monero price..." <- https://xmrpri.se/
15:41:49 <minth> there's also #monero-markets with bots that can tell the price
16:26:40 <ikumay> duck[m]: curl -s 'https://api.coingecko.com/api/v3/simple/price?ids=monero&vs_currencies=usd' | grep -Eo '[0-9]+(\.[0-9]+)?'
16:34:25 <pastel3[m]> <meow[m]> "duckduckgo has microsoft..." <- source?
16:34:28 <pastel3[m]> referring to improving.duckduckgo.com ?
16:51:07 <duck[m]> <ofrnxmr[m]> "The real q is.. what do u need..." <- just to see the price, market cap etc.
16:51:42 <duck[m]> no ads no NSA spyware no google shit
16:52:16 <duck[m]> no "you can win 100 ETH'"
16:52:41 <duck[m]> just monero or other cryptos
16:54:59 <duck[m]> js is ok
16:58:04 <duck[m]> <pastel3[m]> "source?" <- https://techcrunch.com/2022/05/24/ddg-microsoft-tracking-blocking-limit/
16:58:27 <gingeropolous> hrm, now my node seems stuck here: Height: 2199748/2199748 (100.0%) on mainnet, not mining, net hash 1.47 GH/s, v12 (next fork in 14.2 days), 12(out)+0(in) connections, uptime 1d 16h 29m 22s
16:58:34 <gingeropolous> which is around the same spot as last time
16:58:50 <gingeropolous> and someone my node has dropped the connections to the priority nodes that I added
17:02:49 <pastel3[m]> duck[m]: old news and already reverted
17:03:29 <pastel3[m]> also, not blocking certain trackers != having certain trackers
17:03:29 <pastel3[m]> it was a bad move though, without a doubt
17:04:04 <duck[m]> what is the story for the monero and swiss bank meme?
17:04:09 <duck[m]> what?
17:04:26 <duck[m]> what monero has to do with swiss banks?
17:05:26 <r4v3r23[m]> duck[m]: privacy
17:05:50 <duck[m]> swiss banks have privacy?
17:05:56 <r4v3r23[m]> used to
17:07:50 <duck[m]> I don't think some rich guy is going to trade all his money for monero as a Swiss bank alternative
17:08:06 <r4v3r23[m]> no one said he had to
17:08:24 <duck[m]> no one is going to
17:08:30 <r4v3r23[m]> k
17:14:22 <selsta> gingeropolous: this does look like corrupt db
17:14:29 <gingeropolous> argh
17:14:33 <gingeropolous> how ... why
17:14:55 <selsta> what kind of hardware do you have?
17:15:06 <gingeropolous> its a samsund 860 ssd
17:15:13 <gingeropolous> smartctl reports no errors
17:15:26 <selsta> and the computer itself?
17:16:27 <gingeropolous> model name      : AMD Ryzen 9 5900X 12-Core Processor
17:16:33 <gingeropolous> 64 GB ram
17:19:19 <gingeropolous> asus TUF GAMING X570-PLUS 
17:19:19 <selsta> hmm should be all good, self compiled binaries?
17:19:24 <gingeropolous> yep
17:19:33 <selsta> which commit exactly?
17:19:36 <selsta> or version?
17:19:56 <gingeropolous> smart test. # 1  Short offline       Completed without error       00%     12896         -
17:20:15 <gingeropolous> git log:
17:20:16 <gingeropolous> commit e06129bb4d1076f4f2cebabddcee09f1e9e30dcc (HEAD, tag: v0.18.2.2)
17:21:02 <gingeropolous> the hottest hotness
17:21:39 <selsta> a couple things to test
17:22:14 <selsta> were you able to sync up with fast-sync=1 ?
17:23:25 <gingeropolous> i mean, this box was running monerod and was fully syncd (using like v0.18.1.2 or something) before I embarked on this current test
17:23:46 <gingeropolous> so, I haven't tested v0.18.2.2 with fast-sync=1 yet
17:24:19 <selsta> did you change any db-sync settings?
17:24:36 <gingeropolous> no, I just added fast-sync=0 to my monerod.conf
17:25:31 <gingeropolous> oh shit its MRL meeting time aint it
17:25:47 <selsta> i'd try a sync with release binaries and fast sync enabled as a first test
17:26:14 <gingeropolous> sounds good. like, release binaries I gotta download?
17:26:25 <selsta> yes
17:26:52 <selsta> it could be a rare bug that gets easier triggered due to disabling fast sync causing more strain on the db
17:26:58 <selsta> or it's something hardware related
17:28:02 <selsta> hyc1: do you have any suggestions? gingeropolous tried syncing up twice with fast-sync disabled and both times it looks like the db corrupted https://github.com/monero-project/monero/issues/8875
17:32:04 <gingeropolous> currently syncing with downloaded release binaries and default fast-sync=1
18:41:31 <gingeropolous> blargh. , what = Error adding spent key image to db transaction: MDB_PAGE_FULL: Internal error - page has no more space
18:41:57 <gingeropolous> wheres the mdbstat thing
18:44:04 <gingeropolous> hrm.   0 stale readers cleared.
18:44:28 <gingeropolous> now im stuck at Height: 1375516/2893065 (47.5%) on mainnet,
18:45:39 <gingeropolous> da hell is page full
18:47:46 <sech1> ofrnxmr[m] the return of 24/25 (lol jk) https://www.reddit.com/r/Monero/comments/13qc8ik/how_is_the_25th_word_of_a_monero_seed_derived/
18:48:15 <gingeropolous> still at Height: 1375516/2893070 (47.5%) on mainnet, not mining, net hash 134.06 MH/s, v5, 8(out)+0(in) connections, uptime 0d 1h 18m 48s
18:48:26 <gingeropolous> but now im not getting the mdb full thing on my log stream
18:49:01 <gingeropolous> well might as well see if it happens again, only took ~1 hr
19:00:13 <gingeropolous> what is the format for --add-priority-node?
19:00:24 <gingeropolous> is it ip.address.goes.here:thentheport ?
19:00:31 <gingeropolous> or is it just IP address/
19:00:43 <gingeropolous> because my sync info indicates that im not syncing from my priority nodes
19:19:34 <selsta> gingeropolous: i don't think this is related to mdb_stat
19:22:28 <selsta> you can check with print_cn to see your connections
20:41:20 <jollyboy[m]> wise.com, anyone used it to send money?
20:41:33 <jollyboy[m]> would it be a privacy fail?
20:46:47 <ofrnxmr[m]> perhaps ask in LocalMonero Official Group  Or Monero Offtopic 
21:02:39 <arthur_vandalay> !help
21:31:08 <arthur_vandalay> hi
21:51:15 <lza_menace> art vandalay, of vandalay industries?!
23:31:20 <vtnerd> jollyboy[m]: I used wise.com a couple of years ago when it was transferwise.com
23:31:50 <vtnerd> there is no privacy expected, wise.com is a centralized exchange
23:36:12 <gingeropolous> yeah, my priority nodes aren't in my print_cn output
23:37:14 <gingeropolous> wow. 537 spans, 1031.32 MB
23:38:25 <gingeropolous> and now it seems stalled here: Height: 2645004/2893144 (91.4%) on mainnet, not mining, net hash 2.93 GH/s, v14, 12(out)+0(in) connections, uptime 0d 4h 47m 54s
23:38:51 <gingeropolous> but no errors in the log stream
23:39:36 <gingeropolous> well log level 4 here we go
23:41:42 <selsta> log 2 is enough, no need for 4
23:42:10 <gingeropolous> hrm
23:42:58 <selsta> the fact that you got a db error already during sync is suspicious
23:44:06 <gingeropolous> well there's no error this time around
23:44:11 <gingeropolous> at least not according to the logs
23:44:36 <gingeropolous> the behavior is much different. last time it was spitting out a lot of logs. 
23:45:42 <gingeropolous> like, the DB error message would show up in the log stream
23:46:05 <gingeropolous> i had the log stream grep'd with ERROR during the entire sync and there wasn't much of any this time around, except your standard levin errors
23:51:04 <gingeropolous> ugh whats the termbin thats the bin
23:51:05 <gingeropolous> nme
23:51:08 <gingeropolous> name
23:52:17 <gingeropolous> here's my thread apply all bt https://termbin.com/dagw
23:53:48 <gingeropolous> futex. to except is futile
23:53:59 <gingeropolous> futile exception
23:57:28 <gingeropolous> https://termbin.com/dagw . what does it mean. double rainbow